Structural Elements

An important aspect of geomechanical analysis and design is the use of structural support to stabilize a soil or rock mass (i.e., restrict displacements in the immediate vicinity of an excavation or slope). 3DEC 5.2 included four reinforcement types:

  • Local reinforcement at joints (e.g., dowels)
  • Global reinforcement (e.g., cables)
  • Beams
  • Surface Support (e.g., liners; as an added option)

3DEC 7 retains the original local reinforcement at joints. But it now also offers (at no extra cost):

Hybrid Bolts

3DEC hybrid bolts are a new structural element developed to reproduce both the shear and axial behavior of rock bolts, such as fully grouted rebar, cable bolts, and split sets. Hybrid bolts combine a conventional cable element that models the axial behavior with local shear springs (dowels) at fracture intersections that model the shear resistance induced by the presence of the bolt system (steel and grout). Both elements can yield and rupture, reproducing the three stages of load response (elastic, yield, and plastic stages) typically observed in laboratory tests.

3DEC model of a supported tunnel using hybrid bolts. The bolts are contoured based on axial force with the block contours representing displacements. The dowels (at joint intersections), colored by shear force, are also shown.

The hybrid bolt model properties are typically calibrated through simple shear and pullout tests on bolts perpendicular to the joint.

To assist with calibration, a calibration tool for hybrid bolts, shown below, is provided to make it easier to choose bolt properties based on laboratory data.

See it here: Bolt Calibration Tool

The tool provides:

  • Interactive controls
  • Default properties for different bolt types (e.g., rebar, split set, Swellex, and cables)
  • Force/displacement data import
  • 3DEC command generator
  • Save/load parameters
  • Documentation
Interactive calibration tool to determine hybrid bolt properties based on laboratory data.

Latest News
  • Workshop: The “Big Five”: Numerical Modeling of Cave Mining The objective of this MassMin2020 workshop is to review the “Big Five” geomechanical challenges associated...
    Read More
  • 2019 Sloan Outstanding Paper Award Dr. Mojtaba Bahaaddini (Shahid Bahonar University of Kerman), along with Associate Professor Glenn Sharrock (Itasca/UQ),...
    Read More
  • Itasca Awarded Prestigious Caving 2040 Research Grant Itasca’s research aims to answer the key industry question “how should block caves be designed...
    Read More

Upcoming Events
4 Dec.
Analyses of Embankment Dams and Slopes Using FLAC
This hands-on, virtual training course is 16 hours total, spread over four days in a 1.5-week period, and covers the analysis of embank... Read More